5 editing icp contours, Superimposing form elements, Adding contour elements – HEIDENHAIN SW 54843x-03 User Manual

Page 394: 5 editing icp cont ours 5.5 editing icp contours

Text mode
Original mode

394

ICP programming

5.5 Editing ICP cont

ours

5.5

Editing ICP contours

The MANUALplus offers the following possibilities for extending or
changing a programmed contour.

Superimposing form elements

Press the soft key.

Select the desired form element.

Select the corner to be changed.

Confirm the corner for the form element and enter
the data for the form element.

Adding contour elements

You can add to an ICP contour by entering additional contour
elements that are "appended" to the existing contour. A small square
indicates the end of the contour and an arrow indicates the direction.

Press the soft key

"Append" additional contour elements to the existing contour.