HEIDENHAIN ND 1300 OED and Crosshair Systems - Manual (Page 215)

197
10
Setup
Display mode switching
The QC-300 provides two display modes for measurements, Single View and Dual View.
In the Single View mode, the screen used for a measurement will be
displayed again when the measurement is complete.
In the Dual View mode, the last screen used for a measurement will be used again for the current mea-
surement. When the measurement is complete, the screen displayed
before the measurement was initiated will be displayed again.
Touch the Display Mode Switching choice field to toggle the dis-
play mode between Single View and Dual View.
Display Screen