HEIDENHAIN ND 1300 OED and Crosshair Systems - Manual (Page 188)

170 QC-300 Series User’s Guide
Supervisor screen
The Supervisor screen contains fields for entering the
supervisor password, choosing to keep privileges until
the power is cycled and locking the setup menu so that
setup parameters cannot be viewed. Button controls are
also provided for saving system settings to, or loading
setting from the USB port.
Entering the supervisor password
The supervisor password must be entered into the Supervisor setup screen to
access most setup fields. To enter the supervisor password, touch the Supervi-
sor menu item, enter the supervisor password using the number keys on the
front panel and press the Enter key.
Keeping setup privileges until the power is cycled
Setup editing privileges can be retained until the
QC-300 power is cycled, eliminating the need to
reenter the password if another setup editing ses-
sion is required. To retain setup privileges, touch
the Keep Privileges to toggle the Keep Privileges
parameter from No to Yes.
Hiding setup parameters from unauthorized personnel
Views of the Setup can be locked so that the supervisor password is required to see the setup parameter set-
tings. Touch the Lock Setup choice field to toggle the Lock Setup parameter from No to Yes, then delete
the password from
the Password field
and press the Fin-
ish key.
Limiting access to program functions
Operator access to program functions can be
limited to running existing programs by tog-
gling the Lock Programs choice field to Yes.
Touch the Lock Programs choice field to toggle
the setup parameter from No to Yes.