Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 66)

66 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 4 Installing the Aurora Browse System Software
Configuring deployment groups
Prerequisites for this procedure are as follows:
• The device is assigned in the SiteConfig system description and network
connectivity is present.
1. In the Software Deployment | Deployment Groups tree view, right-click the top node
and select Add Deployment Group .
A deployment group appears in the tree view.
2. Right-click the deployment group, select Rename , and enter a name for the
deployment group.
3. Right-click the deployment group and select Add Target Device .
The Add Target Device(s) wizard opens.
4. In the Available Target Devices tree view, select the node that displays the devices
that you are combining as a deployment group.
5. In the right-hand pane, select the devices that you are combining as a deployment
group.
To select multiple devices, you can drag through the devices, use Ctrl + Click, or
use Shift + Click.
6. Click OK .
The devices appear in the Deployment Groups tree view under the
deployment group. Before you perform a software deployment, you
must check software on the devices that will be receiving new soft-
ware. If you have already added packages to the group, on the