Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 193)

April 6, 2010 Aurora Browse Installation and Configuration Guide 193
Host table files
the needs of the facility. The only client side IP address needed in the host table is for
the client switch itself, which is useful for accessing the web management page from
the Aurora Browse devices.
The following is an example of host table entries. Not shown are entries for Profile
systems, UIMs, and other machines on the network. Refer to the documentation for
these other machines for host table requirements.
#--------------------------------------------------------
#General Host Table
#--------------------------------------------------------
#MediaFrame server
192.168.30.21 iron-nb-svr
#Browse MDI server
192.168.30.101 iron-nb-mdi
#Browse NAS
192.168.30.71 iron-nb-nas-1
192.168.30.72 iron-nb-nas-2
#Browse Advanced encoders
192.168.30.50 iron-nb-adv-1
192.168.30.51 iron-nb-adv-2
#Browse single-channel encoders
192.168.30.26 nb-enc-1 #Open SAN Profile mpvs-1 vtr 01
192.168.30.27 nb-enc-2 #Open SAN Profile mpvs-1 vtr 02
192.168.30.28 nb-enc-3 #Open SAN Profile mpvs-1 vtr 03
192.168.30.29 nb-enc-4 #Open SAN Profile mpvs-1 vtr 04
#NB Router Gateway
192.168.30.111 iron-nb-rtr
#The following Client LAN entries are included in this host table for
#reference only. Machines on client network use DNS lookup only.
#Browse live monitor encoder
10.16.37.91 iron-nb-live-1 #Client LAN