Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 100)

100 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 5 Configuring the system
NOTE: If an (iSCSI or Fibre Channel) SNFS mount of the V: drive is available on
the News MDI host, the News MDI will use the mount as required to fulfill the
MDI's service requests for the V: drive, regardless of the Storage Connection Type
and NAS Connection Path entries.
If using Aurora Edit LD in No-V mode, if voiceover and graphic media are stored
on the proxy NAS, the NAS must be mapped on the News MDI.
For example, if the NAS Server media path for a No V Aurora LD is
\\K2-proxy-nas\vo-graphics, the NAS connection path on the News MDI would be
Z:\\K2-proxy-nas\vo-graphics.
If you need to configure multiple NAS systems in the MediaFrame Configuration
tool, use this format:
V:\\k2-highres-share\V | Z:\\K2-proxy-nas\vo-graphics
The following settings enable transfers. You should add all available transfer targets,
as specified in
“Configuring transfer targets” on page 87 .
10.Under Transfer Servers, click Add .
11.Enter a username and the Transfer Server for the MDI selected above. This should
be configured to use the FTP network name.
12.Leave the Password and Public Address fields blank.
13.Click Validate to test the configuration settings. To put changes into effect, start or
restart News MDI Service on the MDI server (DSM).