Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 161)

April 6, 2010 Aurora Browse Installation and Configuration Guide 161
Restoring from the generic recovery disk image on E:
- If the machine is a MediaFrame Server, MDI Server, or K2 BaseCamp
Express, rename the connection to FTP Connection.
- If the machine is an encoder, rename the connection to Media Connection.
d. If the machine is a MediaFrame Server or a K2 BaseCamp Express, rename the
connection that is associated to Port 3 to Corporate LAN Connection.
e. For all other connections rename them to Unused and disable the connection.
f. On the menu bar at the top of the window, select Advanced , then Advanced
Settings…
g. Select Control Connection in Connections field.
h. Use the up arrow button, move the Control Connection to the top of the list (TOP
priority - 1st).
i. Ensure that FTP Connection is below the Control Connection.
If not, select FTP Connection, and move it below the Control Connection.
j. Ensure that Corporate LAN Connection is below the Control Connection.
If not, select Corporate LAN Connection, and move it below the Control
Connection.
k. Click OK to save settings and close.
26. Set power management settings as follows:
a. On the Windows desktop right-click My Network Places and select Properties .
The Network Connections window opens.
b. Right-click a network connection and select Properties .
The …Connection Properties dialog box opens.
c. Click Configure .
The …Properties dialog box opens.
d. On the Power Management tab, uncheck all checkboxes, if they are not already
unchecked.
e. On the …Properties dialog box, click OK .
f. Repeat these steps on the remaining network connections in the Network
Connections window.
27. Install the Discovery Agent software.
• If this machine is a MediaFrame, MDI, or K2 BaseCamp Express server, select
the MediaFrameServer option.
• If this machine is an encoder, select the ProxyEncoder option.
28. Start the SQL Server (MSSQLSERVER) and SQL Server Agent (MSSQLSERVER)
services and set them to Automatic startup .
29. Install MediaFrame server software as described in Chapter 4, Installing the
Aurora Browse System Software on page 33 . Also install related software, such as
SNFS, if required for the latest upgrade. Refer to your latest Aurora Browse
Release Notes for detailed instructions.