Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 52)

52 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 4 Installing the Aurora Browse System Software
If you suspect a problem with these requirements, do not attempt to install SiteConfig
support requirements. If you must restore SiteConfig support requirements, re-image
the system.
Discovering devices with SiteConfig
Prerequisites for this task are as follows:
• The Ethernet switch or switches that the support the control network are configured
and operational. If multiple switches, ISLs are connected and trunks configured.
• The control point PC is communicating on the control network.
• There are no routers between the control point PC and the devices to be discovered.
• Devices to be discovered are Windows operating system devices, with SiteConfig
support installed.
• Devices are cabled for control network connections.
1. Open SiteConfig on the control point PC.
2. In the toolbar, click the discover devices button.
The Discover Devices dialog box opens.
A list of discovered devices is displayed.
3. Click Rescan to re-run the discovery mechanism. You can do this if a device that
you want to discover has its network connection restored or otherwise becomes
available. Additional devices discovered are added to the list.