Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 105)

April 6, 2010 Aurora Browse Installation and Configuration Guide 105
Encoder stand-alone stage
For this configuration stage you configure and test one encoder and one proxy NAS
to work together. The encoder creates storyboard and MPEG proxy. There are two
types of encoder: SmartBin and Aurora Proxy. Configuration pages and procedures
are the same for HD and SD encoders.
The portion of the system configured and tested in this stage is illustrated by the
following diagram.
Refer to “The MediaFrame system” on page 14 for a view of the entire system.
To do the basic configuration and testing of a stand-alone encoder, do the following:
1. Configure the encoder:
• “Configure SmartBin Encoder” on page 106
or
• “Configure Aurora Proxy Encoder” on page 110
2. “Checklist: Encoder stand-alone stage” on page 114
Encoder stand-alone stage
Aurora Browse
Client
Archive
Low-Res
Proxy NAS
Proxy o
Aurora Edit L
DSM* Conform
server
Near-line
System
Encoders
FTP Network
Media (iSCSI) Network
Control Network