Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 56)

56 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 4 Installing the Aurora Browse System Software
Do not modify the IP addresses of the CoServer Link ports (Ports 1 and 2 of the
add-on card). They are used only for communication between the servers. Refer to
“MediaFrame server instructions: HAAR platform” on page 22 .
6. Evaluate settings on the Planned tab and change if necessary.
• Compare settings on the Planned tab with settings on the Current tab.
• If you want to keep the current settings as reported in the Current tab, click
Remove to remove the planned settings.
• Do not specify multiple IP addresses for the same interface. Do not use the Add
button.
7. To modify planned settings, do the following:
a. Select the network settings and click Edit .
The Edit IP Address dialog box opens.
b. Edit IP address settings as follows:
Setting... For network interface Corporate LAN
Interface Name The device host name. Required.
Set To Default Not recommended
DNS Suffix Allowed, if applicable to the network. The DNS suffix is added to the
interface name.
Aliases Not allowed
Use Interface
Name/Aliases in
Host Files Unselected is recommended. Typically this setting has no effect, since the
Corporate LAN does not use host files.