Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 103)

April 6, 2010 Aurora Browse Installation and Configuration Guide 103
Configure Proxy MDI
Configure Proxy MDI
This page configures the Managed Device Interface (MDI) for the NAS machines that
store the low-res proxy. The system depends on the Proxy MDI to make proxy visible
across the system. For the Proxy MDI, there is but one managed device. This managed
device can have multiple locations. The Media directory on each NAS machine is
entered as a location. Other directories can be entered as locations as well. In this way
the Proxy MDI knows where to look for the low-res proxy.
1. Select Programs| MediaFrame Config. Select the MDI Configuration tab and the
Proxy icon.
2. In the Ask Location hostname field, enter the name of the MediaFrame server. Do
not modify Port 9010. See “Ports and services mapping” on page 47 .
3. Set the MDI name.
4. Port 9110 is required. See “Ports and services mapping” on page 47 .
5. To add a storage location, click Add .
6. For each Proxy NAS machine, enter the UNC path to the “Media” folder. This is
the location to which the system writes the proxy media.
1
Click Add .
7. Click Apply or OK after you’ve finished making changes.
8. To put changes into effect, start or restart the Proxy MDI Service on the
MediaFrame server.
1. You can define multiple locations on a single NAS machine, but for each location you must enter the complete path.