Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 42)

42 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 4 Installing the Aurora Browse System Software
• Specify the starting IP address of a set of devices of that model. SiteConfig
automatically assigns IP addresses from this range. If you require a different
sequence of IP addresses, you can modify them on each device after the New
Site Wizard completes.
8. Click Next .
The "...Site will be created..." page opens.
This is the last page and summarizes what the New Site Wizard adds to the tree
view.
9. Click Finish to create the site.
10.Add additional K2 Media Servers as necessary for the proxy NAS.
About the corporate LAN
Some devices, such as the MediaFrame server or Aurora Edit LD worksta-
tions, are on the corporate LAN, which is considered an unmanaged net-
work in SiteConfig. You can configure your system description to include
the corporate LAN for the following purposes:
• If a device, such as the MediaFrame server, is on the corporate LAN yet is a
SiteConfig managed device, then SiteConfig needs to know the connection for
each network interface on the device, including the corporate LAN connection.
Otherwise, SiteConfig displays error messages.
• If a device uses a DNS server on the corporate LAN for name resolution,