Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 22)

22 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 2 Installing the Aurora Browse system hardware
MediaFrame server instructions: HAAR platform
This topic is divided into two sections:
“Cabling the HAAR system servers” on page 22
“Configuring the HAAR system network” on page 23
Cabling the HAAR system servers
For the MediaFrame server you have the option of the high availability HAAR
platform. This platform is made up of two interconnected servers.
NOTE: It is no longer recommended to install Windows Media Player on the HAAR
platform because of compatibility problems, so you can not run the Aurora Browse
application locally on the HAAR platform.
HAAR platform (Dell R610 servers with an additional network card)
Cable as illustrated and as follows:
• Connect port 1 to the control network.
• Connect port 2 to the FTP network.
• Connect port 3 to the Corporate LAN.
• Use LAN port 4 for Co-Server management.
• Ports A and B of the add-on card are used for Co-Server links. Interconnect
Co-Server Link ports with cross-over cables.
• Connect power cables to a power supply. Power supply units are hot-swappable.
Power LAN ports 1-4 VGA cable
to KVM Keyboard/mouse
ports Power
Power LAN ports 1-4 VGA cable
to KVM Keyboard/mouse
ports Power
Co-Server ports A-B
Co-Server ports A-B