Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 36)

36 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 4 Installing the Aurora Browse System Software
Infrastructure checklist
Acquire Aurora Browse and
Aurora Suite Software CDs
or download the latest
software needed for the
installation. See the Aurora Browse
Release Notes and Upgrade
Instructions for the list of
required software. The Aurora Suite software is
used to install Aurora FTP
on the encoder.
Install SiteConfig on a
control point PC within your
network operation. See “Install prerequisite
files on the control point
PC” on page 67
.
Next: Infrastructure checklist
Task Instructions Comment
Rack and cable the system. Follow the K2 SAN Cabling
Guide, and other
documentation that comes
packaged with devices. Also
refer to
Chapter 2,
“Installing the Aurora
Browse system hardware”
.
Configure Ethernet
switch(es).
Refer to Chapter 2,
“Installing the Aurora
Browse system hardware”
and K2 documentation on
setting up the Ethernet
switch.
If you have not already done
so, import or create the
SiteConfig System
Description on the control
point PC. Refer to “About
SiteConfig” on page 34 ",
“About developing a system
description” on page 34
, and
SiteConfig documentation:
- If your system has a
stand-alone K2 system, refer
to the K2 System Guide for
instructions on creating a
system description.
- If your system has a K2
SAN system, refer to the K2
SAN Installation and
Storage Manual for
instructions on creating a
system description.
Next: Network setup and implementation checklist
Task Instructions Comment