Visara FEP-4600 Installation - Manual (Page 90)

Chapter 7. SDLC Interface
7-6 707119-001
SDLC Drop Panel (PU Type 2)
By selecting the ‘Drops’ button the following SDLC Drop Configuration panel will
display.
The options that may be configured for each drop consists of:
Field Definitions
Line: This defaults to the line that you selected. You can change to a different line to
make changes to.
Drop: This defaults to the Drop that you selected, but you can change the configuration
of a different drop if you wish by selecting another drop from the drop down control.
Undefined Drops are ignored. To add a new drop, select the ’Add’ button at the bottom of
the panel.
Drop ID: This is a text field (alphanumeric plus underscore, dash, and period) that you
can define that will be used in the FEP-4600 panels to allow you to recognize individual
drops better.
Address: This is the hex value (01-FE) that will be used to poll the platform identified
by this Drop. The value entered on this panel must match the configuration of the
platform that is represented by this drop.
Frame Size: This option determines the maximum frame size that will be sent by the
FEP-4600 to the remote platform, and ranges from 265-4105. Common values are: