Visara FEP-4600 Installation - Manual (Page 33)

FEP-4600 Installation and Configuration
707119-001 3-9
Save/Restore Configuration Panel
Selecting the Save/Restore option from the Configuration panel will display the
following panel.
From this panel you can save, delete, and restore configurations. Up to 4 configurations
for the FEP-4600 can be kept at one time; one active configuration and three previously
saved configurations. If you need to manage more than 4 configurations you may want to
employ the eManager product. With eManager you can push and pull configuration files
as needed.
When saving a configuration, a name is assigned and the date and time are recorded. This
information is displayed on this panel along with buttons that can be used to activate
inactive configurations, or delete them. The configuration that is currently active is
identified on this panel also. Changes made to the current configuration are saved as part
of the current configuration automatically. You do not need to save the current
configuration with this utility unless you desire to save a snapshot of what the current
configuration is (for possible use later).
A newly reactivated configuration will not take affect until the FEP-4600 is either
restarted or rebooted, depending on the option changes.
Among the options that would require a reboot are:
• ESCON Options have changed
• Ethernet MAC address has changed
• Token Ring MAC address has changed