Visara FEP-4600 Installation - Manual (Page 65)

FEP-4600 Installation and Configuration
707119-001 5-13
PU 4 Interface Options
When selecting the Network Protocol to be SNA-PU4, several additional options will be
enabled. Refer to the diagram below to aid in determining the correct values to enter onto
this panel.
Token Ring Drop Panel for Protocol ‘SNA-PU4’
Pressing the [Drops] button on the Token Ring Line panel causes the Token Ring Drop
panel to display. This panel allows you to define a Token Ring drop that will be
associated with an upstream ESCON Local Major Node definition on the host. By default
the Network Protocol is set to ‘SNA-PU2’. To change this to a PU4 drop definition,
select ‘SNA-PU4’ from the Network Protocol dropdown control. An example of this
panel (SNA-PU4) appears below.
VTAM
1
SA01
VTAM
2
SA02
Gateway
VTAM
3
SA03
Gateway
NCP
4
SA04
CPU FEP-4600
CTC CTC
3745 CPU
NCP
14
SA14
VTAM
10
SA10
VTAM
5
SA05
CTC
NETID=NET1
NETID=NET2
Null Network
NETID=NULL
SA99 SA98
NULL-Net ID
Option
Subarea
Number
Option
TG Number SSCP Name
Net ID Option
Adj Element
Number Element Number