Super Systems 20PQ - Manual (Page 30)

26
Keyboard description
MENU = is used to select a parameter group
FUNC = o when the instrument is in "normal display mode" it
changes the indication on the lower display (see
"display function").
o During parameter modification, it allows you to
memorize the new value of the selected parameter
and go to the next parameter (increasing order).
MAN = o when the instrument is in "normal display mode",
pushing MAN push-button for more than 1 s, it is
possible to enable or disable the manual function.
o During parameter modification, it allows you to scroll
back the parameters and groups without memoriz-
ing the new setting.
s = o During parameter modification, it allows you to
increase the value of the selected parameter
o During MANUAL mode, it allows you to increase the
output value.
o During program execution with the instrument in
HOLD status, it allows you to shift forward the
program with a speed 60 time faster than normal.
t = o During parameter modification, it allows you to
decrease the value of the selected parameter
o During MANUAL mode, it allows to decrease the
output value.
o During program execution with the instrument in
HOLD status, it allows you to shift backward the
program with a speed 60 time faster than normal.
RUN = allows:
- to rapidly select the program to execute.
- to start program execution,
- to toggle from RUN to HOLD mode or viceversa
(pushing for more than 3 s and less than 10 s) or
- to ABORT program execution (pushing for more
than 10 s).
RUN + s= during program editing are used to add a program
segment (see paragraph "How to edit a program")
RUN + t= during program editing are used to delete a
program segment (see paragraph "How to edit a
program")
RUN + MENU = during program editing are used to jump to
the first parameter of the next segment (see
paragraph "How to edit a program")
RUN + MAN = during program editing are used to check the
selected program (see paragraph "How to check a
program")
XKP-1-C2.p65 10/30/01, 9:37 AM 26