Super Systems 20PQ - Manual (Page 133)

129
FAST
This function allows to move, forward or backward, the point of
the program in progress 60 time faster than the programmed
value.
When it is desired to activate the FAST function, proceed as
follows:
1) Put the instrument in HOLD mode.
2) Push for more than 3 seconds the
s or t pushbutton (fast
forward or backward respectively).
The value on the central display will change and the istrument
will carry out, forward or backward, the segment in progress
60 time fast than the programmed value.
3) Relase the button. The FAST function will continue to scroll
the segment.
The scrolling will be automatically stopped when:
- a fast forward action is in progress and the instrument
reaches the beginning of the next segment;
- a fast backward action is in progress and the instrument
reaches the end of the previous segment.
4) Push the button again, the FAST function restarts on the next
segment.
5) When the desired point has been reached, push the s or t
pushbutton and the scrolling will be stopped.
6) Restart the program.
NOTES:
1) When the FAST function is activated, the central display will
show the same indication described for the RUN mode.
2) When the FAST function is activated, the instrument modifies
the power output in accordance with the actual set point
value.
JUMP
This function allows jump, forward or backward, to the beginning
or to the end of the segments.
When it is desired to activate the JUMP function, proceed as
follows:
1) Put the instrument in HOLD mode.
2) Push the
s + MAN or t + MAN pushbuttons (JUMP forward
or backward respectively).
The instrument will jump automatically:
- to the beginning of the next segment if a jump forward
action has been required;
- to the end of the previous segment if a jump backward
action has been required;
3) Push the two buttons again to reach the beginning of the next
segment and so on.
XKP-1-C2.p65 10/30/01, 9:37 AM 129