Super Systems 20PQ - Manual (Page 158)

A. 4
Pb 5 = 4.0 %
HYS 5 = 0.5 %
ti 5 = 4.00 mm.ss
td 5 = 1.00 mm.ss
IP 5 = 50.0 (If only one control output is configured).
0.0 (If two control outputs, without split range,
are configured).
r.Gn 5 = 1.00
OLP.5 = 0
Run time group 5 [r.Exx]
PARAMETER DEFAULT VALUE
ArW = 100%
Sñ.tt = 1.00 m
Sñ.db = 5%
ñ.OLL = 0.0%
ñ.OLH = 100.0%
ñ.rñP = Inf
ñC.CY = 15 s (If relay output)
2 s (If SSR output)
S.OLL = 0.0%
S.OLH = 100.0%
S.rñP = Inf
SC.CY = 15 s (If relay output)
2 s (If SSR output)
rL = Initial range value
rH = Final range value
Grd1 = Inf
Grd2 = Inf
tOL = Inf
E.Añ = On
E.Lr = On
E.rd = On
Run time group 6 [r.Fxx]
PARAMETER DEFAULT VALUE
A1.tP = Proc
A1.Cn = H.A.
A1.Ac = rEV
A1.St = OFF
A2.tP = Proc
A2.Cn = H.A.
A2.Ac = rEV
A2.St = OFF
A3.tP = Proc
A3.Cn = H.A.
XkP-A-C2.P65 10/30/01, 9:44 AM 4