Smithco Envizio Pro Installation & Operation Manual - Manual (Page 82)

Chapter 6
72 Envizio Pro and Envizio Pro II Installation and Operation Manual
Product Rate Display
The field computer displays rate information for each enabled product in the upper, right corner of the
Guidance screen.
The following information appears in the Product Rate Display:
• Name of each enabled product
• Target rate of each product
• Actual rate of each product
• Selected product
Note:
While monitoring product application from a separate rate control console via a serial connection,
the field computer will display the number of products currently enabled on the rate controller.
Selected Product. During a single product application, the product enabled during the job setup process will
always be selected during the job.
If additional products are enabled, the name and rates of the selected product are highlighted. To toggle the
currently selected product, touch the product names within the Product Rate Display. Tank or bin volumes,
area applied and coverage maps are displayed according to the product selected in the Product Rate Display.
In Job Product Configuration
Several product control settings and display options are available during a job by touching the rates area of the
Product Rate Display. The following screen is displayed:
3
2
4
5
1