Using spray zone maps, Loading a field boundary – Smithco Envizio Pro Installation & Operation Manual User Manual
Page 167
9
Manual No. 016-0171-148
157
Using AccuBoom™
Using Spray Zone Maps
An AccuBoom spray zone map may contain numerous spray and no-spray zones for each field. Spray zone
maps may be modified at any time using the available tools and features of the spray zone mapping mode.
The following sections will cover various methods of using spray zone maps and field boundaries stored on the
field computer.
Loading a Field Boundary
A field boundary recorded without the AccuBoom feature enabled can be loaded as an AccuBoom field
boundary within a spray zone mapping enabled job. To load a standard field boundary into an AccuBoom
enabled job:
1.
Touch the Menu icon in the lower right corner of the Guidance screen.
2.
Select the Spray Zone Mapping Tools icon.
3.
Select the Load Field Boundary icon.
A list of available field boundaries currently saved on the field computer will display.
4.
Select the name of the job with the desired field boundary and touch Accept icon. The selected
field boundary is displayed on the Guidance screen.