Smithco Envizio Pro Installation & Operation Manual - Manual (Page 81)

6
Manual No. 016-0171-148 71
Basic Operation
Tank or Bin Indicator
The tank or bin level indicator displays an estimate of product remaining in the tank or bin for the selected
product.
Touch this indicator to view the Tank or Bin Volume Configuration screen. The Volume Configuration screen
will display the current level remaining in the tank or bin.
To adjust the tank or bin level for the selected product:
1. Use the keypad to enter the volume of product remaining.
2. Touch the Accept icon to enter the new tank or bin level and return to the Guidance screen. The tank or bin
level indicator will display the entered level.
Note:
Touch the Cancel icon to exit the Volume Configuration screen without keeping any changes made
on this screen.
Reset Tank or Bin Button. Touch the Reset button to quickly reset the tank or bin level to the pre-
programmed bin or tank size.
Tank or Bin Size Button. Touch the tank or bin size button to configure the volume of product in the tank or
bin. Each product control node may have a separate volume and tank or bin level.
Note:
If the Reset button will be used to recalibrate the bin or tank level, the bin or tank size should be
set at the volume of product in the tank after refilling; not necessarily the capacity of the bin or
tank.
Current Level