Smithco Envizio Pro Installation & Operation Manual - Manual (Page 171)

9
Manual No. 016-0171-148 161
Using AccuBoom™
5. The Guidance screen will re-appear and the field computer will begin recording the feature at the selected
Reference Point. On the Guidance screen, a Pause and End icon appear for the feature currently being
recorded.
6. Begin driving along the boundary while keeping the Reference Point aligned with the field boundary. A
yellow path will be created on screen to display the path recorded.
7. Touch the Stop button to finish recording the current feature on the AccuBoom map.
Note:
The field computer will close the feature by drawing a straight line from the machine’s current
location to the point were recording of the feature was started. Area’s inside and outside of the
feature will be treated accordingly.
8. Repeat step 2 through step 7 for any additional features.
9. When finished recording features for the AccuBoom map, touch the Accept button to save the currently
displayed AccuBoom map and close the AccuBoom tools menu.
Note:
Spray/no-spray zone features created while recording a field boundary will not appear until the
Save and Close icon is selected from the AccuBoom Tools Menu.
Recorded Path