Smithco Envizio Pro Installation & Operation Manual - Manual (Page 101)

7
Manual No. 016-0171-148 91
Tools Menu
Vehicle Menu
Access the Vehicle menu to setup or modify vehicle profiles for each machine or implement with
which the field computer will be used. Profiles allow the operator to setup GPS antenna heights
and offsets as well as the swath width and section setup for each implement once and quickly
reload a vehicle’s profile when transferring the Envizio Pro or Envizio Pro II between vehicles.
Show All
Select the Show All icon to show an overview of the Tools menu. The Show All screen is displayed
each time the Tools menu is accessed.
Navigation
The following icons will be used to navigate within the menu screens and to edit and save settings:
Touch the Home icon to return to the Home screen.
Touch the Accept icon to confirm any changes to a screen. Touching the Accept icon will save
those settings and proceed to the next screen.
Touch the Cancel icon to exit the current screen without saving any changes made on a screen. If
the Cancel icon is displayed in grey, the cancel feature is currently unavailable.
Like the Accept icon, the Next icon accepts changes and proceeds to the next screen in a setup
procedure. Touch this icon where it appears to access more settings or to continue a setup
procedure. The last screen in a setup procedure should display the Accept icon.
Touch the Previous icon to return to the last screen displayed during a setup procedure or wizard.
The Up icon, where it appears, increases displayed values in preset increments. Touch this icon to
increase a value until the desired value is displayed.
The Down icon, where it appears, decreases displayed values in preset increments. Touch this
icon to decrease a value until the desired value is displayed.