Recording setup tab, Recording setup tab …… 4-18, Recording setup…… 4-18 – Measurement Computing eZ-PostView rev.2.0 User Manual

Page 96: Recording setup, Configuration

4-18 Edit Menu

969795

eZ-Analyst

Edit Menu

> Configuration >

Recording Setup Tab

eZ-Analyst Only

Recording Setup Tab

Edit Menu > Configuration >

Recording Setup Tab:

Start Recording Panel

Provide a means of setting the following parameters that pertain directly to the start
condition.

Note that the Start Recording panel is not available for WaveBook applications.

PreAcq-Trigger – select this function to include [with the recording] data that precedes the
trigger event by the set number of seconds.

PostAcq-Trigger – select this function to exclude [from the recording] data that follows the

trigger event by the set number of seconds.

Note: You can not set a Start Delay for the start recording if PreAcq-Trigger is selected,

and visa versa.

Enable Start Trigger – if the checkbox is checked, amplitude-based data can be set as a

PreAcq-Trigger condition to Start Recording. The following options are provided.

Amplitude-Based

Data Types

Peak Time >=
Peak Time <

Spectrum >=
Spectrum <

at specified frequency