Measurement Computing eZ-PostView rev.2.0 - Manual (Page 111)

eZ-Analyst 969795 Edit Menu 4-33
Edit Menu > Output Channel Setup*
* Access to the setup region differs depending on the data acquisition device. For ZonicBook
Medallion an Output Channel panel appears on the Input/Output Channels tab. For
WaveBooks and ZonicBook/618E an Output Channel window can be accessed directly from
the Edit pull-down menu [when in the measurement mode]. In all cases, the setup is
performed on a channel-by-channel basis. Configuration changes are accepted as soon as
the or button is clicked.
ZonicBook Medallion Applications
WARNING
When the Signal Generator is started [in eZ-Analyst] the device that is
connected to Source Output will receive excitation and could possibly
cause injury to personnel. Be aware of which device is receiving
excitation and post adequate notice to keep individuals and physical
objects clear of the device.
Reference Note:
For ZonicBook/618E and WaveBook applications refer to page 4-34.
In regard to ZonicBook Medallion, the Internal Signal Generator is set up in the Output
Channel panel. The output waveform (Sine, Random, or Sine+Random) is selected from
the pull-down menu (see figure).
Input / Output Channels Tab – ZonicBook Medallion