Measurement Computing eZ-PostView rev.2.0 - Manual (Page 137)

Appendix A 957597
K eyboard Controls A-3
Plot Display Controls (Note)
Keys Function Comments
A Turns Auto-scale On. -----
Alt Expands or contracts the Y-Axis. (a) While holding down the key, place the
cursor at the desired start point of the Y-axis,
(b) click the left mouse button, (c) drag the
mouse vertically until the cursor is at the new
end point of the scale.
b Bank up. -----
+ b Bank down. -----
C Toggles the cursor On or Off; or cycles the
cursor options as follows (if Band Cursor is
selected): Adds a Cursor, Adds a second
Cursor, turns both cursors Off.
When Band Cursor is selected, the “C” key
cycles through On (add a cursor), add a second
cursor, and Off.
Ctrl Expands or contracts the X-Axis. (a) While holding down the key, place
the cursor at the desired start point of the X-
axis, (b) click the left mouse button, (c) drag the
mouse horizontally until the cursor is at the new
end point of the scale.
Ctrl + Alt Simultaneously expands [or contracts]
both the X and Y axes.
(a) While holding down both the and
keys, place the cursor at the desired start
point on the plot, (b) click the left mouse button,
(c) drag the mouse diagonally until the cursor is
at the new end point of the scale.
Zooms in or out. When you depress one of these keys, while
dragging with the right mouse button depressed,
you will zoom in or out, according to the cursor-
defined region.
F2 or Z
(2 functions)
Pan along the X-axis, Y-axis, or both. By depressing one of these keys, while dragging
with the left mouse button depressed, you can
pan in the direction of the drag.
F3 Zoom in or out. Use F3 with the left mouse button to zoom in
our out.
G Turns Plot Grid On or Off. Toggles the grid to On or Off.
L Changes the Scale to Linear or to Log. Toggles the scale to Linear or to Log.
R Start Recording -----
S Start Scope Mode (Measurement) -----
X Presents the X-Axis Menu -----
Y Presents the Y-Axis Menu -----
Z or F2 Zooming or Panning. See “F2.”
Note: Also see the Display Menu Control Table.
Reference Note: For more detailed information, which includes graphics, refer to
chapter 5, Interactive Features of the Plot Display Window .