Measurement Computing eZ-PostView rev.2.0 - Manual (Page 112)

4-34 Edit Menu 969795 eZ-Analyst
Output Channel Configuration for ZonicBook Medallion
Output Wave Type Text Box Entries
Sine
Amplitude: The maximum amplitude range is 1.4 volts zero-to-
peak. The value is typed in the text-box. The units are volts.
Frequency: This is the frequency, in Hz, of a sine waveform. The
maximum value is 2000 Hz. The value is typed in the text-box.
Random Amplitude: This is the amplitude variance for the Random output
signal. The maximum value is 1.4 volts zero-to-peak. The value is
typed in the text-box. The units are volts.
Sine + Random Displays text box areas for the Sine Waveform and Random
Waveform signal types just described.
For ZonicBook Medallion, the signal output option is only valid when the
analysis frequency is less than, or equal to, 4000Hz. Thus, whenever
analysis frequency is set above 4000Hz the signal generator button is
disabled.
ZonicBook/618E and WaveBook Applications
WARNING
When the Signal Generator is started [in eZ-Analyst] the device that is
connected to Source Output will receive excitation and could possibly
cause injury to personnel. Be aware of which device is receiving
excitation and post adequate notice to keep individuals and physical
objects clear of the device.
Do not confuse the Output Source [excitation source] with source level,
as the latter term refers to transducer bias current.
Reference Note:
For ZonicBook Medallion applications refer to page 4-33.