Measurement Computing eZ-PostView rev.2.0 - Manual (Page 135)

Appendix A 957597
K eyboard Controls A-1
Appendix A Keyboard Controls for eZ-Analyst A
This appendix consists of several hot key tables for the benefit of those who prefer to use keys in
place of mouse/cursor interaction with a GUI. However, for certain functions, such as changing axis
scales, a mouse will be needed. Mouse use is pointed out in the tables, when applicable.
Record / Playback Control
Keys
Function Comments
p Play Forward -----
+ p Play Backward -----
o Step Forward and Record -----
+ o Step Backward and Record -----
H Halt Playback -----
Measurement, Scope, and Generator Control
Keys
Function Comments
H Halt the measurement -----
R Start recording -----
S Start Scope Mode (Measurement) -----
W Turn the signal generator On -----
Menu and Window Control
Keys
Function Comments
Presents the Edit Menu. -----
Presents the Plot Window Colors
window.
After pressing Alt + E to access the Edit
Menu, press C to get the Colors Window. Use
the Tab key to select a characteristic, then hit
.
Presents the Configuration window. After pressing Alt + E to access the Edit
Menu, press M to get the Configuration
Window. You will need a mouse to access all
panels. Also, see Ctrl + M.
Alt + E …
… C
… M
… P
Presents the Playback Setup window. After pressing Alt + E to access the Edit
Menu, press P to get the Playback Setup
Window. Use the Tab and arrow keys to make
selections within this window. Then hit
.
Alt + F Presents the File Menu. -----
Alt + W Presents the Window Menu. You will need a mouse to make selections.
Ctrl + M Presents the Configuration window. You will need a mouse to access all panels.
An alternative to Ctrl + M is to press M when
the Edit Menu is open.
Ctrl + O Presents the Open File Dialog window. From within the window, use the Tab and
arrow keys. An alternative to Ctrl + O is to
press O when the File Menu is open.
Ctrl + P Presents the Print Dialog window. An alternative to Ctrl + P is to press P when
the File Menu is open.
D Presents the Display Menu, also
referred to as the Plot Display
Characteristics Menu.
Refer to the following table for control options
related to the Display Menu.