Gasboy 1000 Series FMS Diagnostic Manual - Manual (Page 79)

GASBOY Series 1000
5-4 03/07/03
Test 0 - Calculate PIN
Card Systems
This test reads a card and calculates the correct PIN (personal identification number) for the card.
1. Enter diagnostic mode as described previously. At the ENTER TEST 0-9 prompt, press 0
and ENTER.
2. At the ENTER CARD prompt, insert the card for which the PIN is to be calculated.
3. At the REMOVE CARD prompt, remove the card from the reader. The PIN for this card
appears on the LCD display.
4. To calculate another PIN, press any button except ENTER and repeat this procedure from
Step 2.
If you press ENTER at the ENTER CARD prompt, you are returned to the ENTER TEST 0-9
prompt.
To exit from diagnostic mode, turn off the diagnostic switch at any point.
Cardless Systems
This test calculates the correct PIN (personal identification number) based on the data entered as
the second ID field.
1. Enter diagnostic mode as described previously. At the ENTER TEST 0-9 prompt, press 0
and ENTER.
2. At the ENTER XXXX (XXXX is the second account field) prompt, type the second ID field
data for which the PIN is to be calculated. The PIN for this vehicle record appears on the
LCD display.
3. To calculate another PIN, press any button except ENTER and repeat this procedure from
Step 2.
If you press ENTER at the ENTER XXXX prompt, you are returned to the ENTER TEST 0-9
prompt.
To exit from diagnostic mode, turn off the diagnostic switch at any point.
FleetKey Systems
This test reads a key and calculates the correct PIN (personal identification number) for the key.
1. Enter diagnostic mode as described previously. At the ENTER TEST 0-9 prompt, press 0
and ENTER.
2. At the INSERT KEY prompt, insert and turn the key for which the PIN is to be calculated.