Gasboy 1000 Series FMS Diagnostic Manual - Manual (Page 120)

03/07/03 7-1
Section 7
REPLACEMENT INSTRUCTIONS
DESCRIPTION
When servicing the Series 1000 you will find that most of the parts are easy to replace and do not
require written replacement procedures. Most of the cables are keyed so they cannot be reversed
which would cause additional service problems. The cables that are not keyed and any parts that
require replacement procedures are detailed in the following pages.
IMPORTANT
Before replacing parts in the Series 1000 you must always turn off the system's internal
power switch. However, to truly avoid any danger of electrical shock you must turn off the
system's circuit breaker as well as the circuit breakers to all pumps/dispensers controlled
by the system.