Fluke Biomedical medSim 300B - Manual (Page 66)

medSim 300B
Operators Manual
3-38
To select ECG artifact waveform type:
1. Press -WAVE from the ECG ARTIFACT MENU to access the following
two pages of menu selections:
ecg artifact
off 50hz 60hz mscl >
eic097.eps
ecg artifact
wndr <
eic098.eps
2. Press the corresponding function key for the desired ECG artifact waveform type
selection.
ECG artifact waveform type selections and their descriptions follow:
Selections Descriptions
off
Shuts off ECG artifact.
50 Hz 50 Hz artifact.
60 Hz 60 Hz artifact.
mscl Muscular artifact.
wndr Baseline wander artifact.
To select the lead to which the waveform type is to be added:
1. Press -LEAD from the ECG ARTIFACT MENU to access the following
two menu pages:
ecg artifact lead
all ra la ll >
eic099.eps
ecg artifact lead
v1 <
eic100.eps