Function select - blood pressure menu – Fluke Biomedical medSim 300B User Manual

Page 57

Operation

Operating the medSim 300B

3-29

BP CHANNEL SELECT

zero

eic069.eps

Note

Illustrations may not match your medSim 300B display if additions, options,

or expansion modules have been installed.

There are four blood pressure channels, each programmed separately.
The dynamic blood pressures are specified for their systolic and diastolic values for rates

of 80 BPM and less. For higher rates, the systolic pressure stays the same but the diastolic

pressure increases as the rate increases.
All dynamic pressures are synchronized with all normal sinus rhythm rates, and

physiologically track all arrhythmias.

Note

Select -ZERO from the BP SELECT CHANNEL to set all the channels

to "atmosphere".

Press -1 to access the BP 1 MENU:

BP 1

WAVE

STAT

eic070.eps

BP 1 has both dynamic waveforms and static pressures.
To select a dynamic waveform:

1. Press -WAVE to access the two menu pages as shown:

bp 1 waveforms

atm

art

cvp

eic071.eps

bp 1 waveforms

paw

eic072.eps