Fluke Biomedical medSim 300B User Manual
Page 3

Notices
Fluke Biomedical
6920 Seaway Blvd.
Everett, WA 98203
USA
Customer Support and Sales
USA and Canada:
800.648.7952
Outside the USA:
775.883.3400
E-Mail:
Internet: www.flukebiomedical.com
Service
Service: 888.993.5853
Outside the USA:
425.446.5560
E-Mail:
For additional sales or service information, contact your local Fluke Biomedical
Distributor or Fluke Electronics office
All Rights Reserved
Copyright 2006, Fluke Biomedical. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language
without the written permission of Fluke Biomedical.
Restrictions and Liabilities
Information in this document is subject to change and does not represent a commitment
by Fluke Biomedical. Changes made to the information in this document will be
incorporated in new editions of the publication. No responsibility is assumed by Fluke
Biomedical for the use or reliability of software or equipment that is not supplied by
Fluke Biomedical, or its affiliated dealers.
Claims
Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if
physical damage is found, retain all packing materials in their original condition and
contact the carrier immediately to file a claim.
If the instrument is delivered in good physical condition but does not operate within
specifications, or if there are any other problems not caused by shipping damage, please
contact Fluke Biomedical or your local sales representative.
Certification
This instrument was thoroughly tested and inspected. It was found to meet Fluke
Biomedical’s manufacturing specifications when it was shipped from the factory.
Calibration measurements are traceable to the National Institute of Standards and
Technology (NIST). Devices for which there are no NIST calibration standards are
measured against in-house performance standards using accepted test procedures.
Obtaining Assistance
If you have trouble operating the equipment, or just need some clarification on its
operation, contact Fluke Biomedical’s Technical Assistance Center at 800-648-7952.