Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide - Manual (Page 91)

Pro-Stitcher User Manual Settings Menu | 8.7
If the Pro-Stitcher computer cannot communicate with the motors for any reason, it will be indicated by a
lightning bolt icon at the top right-hand corner of the screen.
• Press Reconnect Motors or the Motor Error button in the top right-hand corner of the screen to
reestablish communications between the Pro-Stitcher computer and the motors.
To reconnect the machine
You may need to reestablish communications between Pro-Stitcher and the quilting machine. For example,
this happens when you start the Pro-Stitcher computer while the quilting machine is turned off.
• Press Reconnect Machine to reestablish communications between the Pro-Stitcher and the quilting
machine.
Easily test whether Pro-Stitcher is communicating with the quilting machine by pressing the Full Stitch
button at the top of the Pro-Stitcher screen, or looking at the touchscreen on the quilting machine’s
handlebars. If there is communication between the quilting machine and Pro-Stitcher, the quilting
machine’s touchscreen will indicate it. If they are connected, the quilting machine will cycle the needle.
If they are not communicating, nothing will happen. If the Pro-Stitcher computer can detect that it is not
communicating with the quilting machine, a lightning bolt icon will appear in the top left-hand corner of
the Pro-Stitcher screen. Pressing that button will perform the same function as the Reconnect Machine
button.