Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 79

7.6 | Quilt Menu
Pro-Stitcher User Manual
• Select the Auto Jump box to specify the maximum length (in inches) of a jump, or gap in a design
path. A number pad appears on the screen for you to enter the number, then press Enter.
Alternately, use the Plus Sign (+) to increase or Minus Sign (–) to decrease the number.
To adjust stitches per inch while quilting
• Enter the number of stitches per inch for quilting the design. A number pad appears on the screen
for you to enter a number, then press Enter. Alternately, use the Plus Sign (+) to increase or Minus
Sign (–) to decrease the number.
Machine Quilting Tip: The best stitches per inch setting for your design
Smaller designs, especially designs that have lots of curves and circles, may require a shorter
stitch length, such as 12 to 18 stitches per inch. Less intricate designs with large curves or
circles can use a larger stitch length, such as 10 stitches per inch.
To manage the tieoff settings while quilting
Indicate how to tie off the stitching at jump points and at the start and end of a design. For more
information about the tieoff settings, see Control how Pro-Stitcher performs tie-offs in chapter 8, Settings
Menu.
Change the auto jump
threshold by entering
a number or using the
Plus Sign to increase
or the Minus Sign to
decrease.
Change the number
of stitches per inch by
entering a number or
using the Plus Sign to
increase or Minus Sign
to decrease.