Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide - Manual (Page 42)

Pro-Stitcher User Manual Design Menu | 5.7
To load a Pro-Stitcher software update
As updates for the Pro-Stitcher software become available, download the update file from the Baby Lock
website, www.babylock.com.
• Select the Upgrades/Updates link at the top of the page. Then select Pro-Stitcher Software Update.
Follow the instructions for downloading the latest update, save the update file to a USB flash drive, and
plug the USB flash drive into a USB port on the Pro-Stitcher computer. Wait for approximately 10 seconds
while Pro-Stitcher accesses the USB flash drive. Follow the instructions included on the website for
installing the update.
To return a design to its original settings
Many settings in Pro-Stitcher remain set even after other operations are performed. For example, you
might rotate a design, repeat it multiple times, resize it, and more.
• To turn off design changes you’ve made since the last baseline, press Reset All.
If a new design is loaded or you baseline the design, Reset All is automatically performed.