Crop menu, Treatment of loose ends – Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 50

Pro-Stitcher User Manual
Design Menu | 5.15
Crop Menu
Use Crop menu functions in conjunction with areas. After modifying a design as needed, mark an area that
represents the region to be cropped.
• Select Design and then Crop.
NOTE: If the Crop panel buttons at the bottom of the screen are grayed out, an area hasn’t yet been
defined. Define the area to be cropped before using any of the Crop functions.
Treatment of loose ends
Pro-Stitcher has two ways of handling loose ends, or jump points, that are created from a crop: Open or
Closed.
To perform a tieoff at jump points
• Choose Open to perform a tieoff at the jump points in a cropped design. Select Tie Off Start and Tie
Off Finish in Settings. For more information about the tieoff settings, see Control how Pro-Stitcher
performs tie-offs in chapter 8, Settings Menu.
To stitch between jump points
• Choose Closed to stitch along the border of the cropped area between jump points in a cropped
design.
Machine Quilting Tip: To stitch around the cropped area
The Closed option may not stitch the entire area outline. Consider using Trace Outline to
stitch around the perimeter of the area.
Purple lines show the
star-shaped multi-
point area.
!