Move the quilting machine with pro-stitcher – Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 76

Pro-Stitcher User Manual
Quilt Menu | 7.3
Move the quilting machine with Pro-Stitcher
The Move function moves the quilting machine in any of the eight directions indicated by the on-screen
arrows.
To change the speed at which the machine moves
• Tap the Plus Sign (+) to increase the movement speed. Tap the Minus Sign (–) to decrease the
movement speed. Or select the number box and enter a value (up to 50) in the number pad that
appears and then press Enter.
To move the quilting machine from within Pro-Stitcher
• Press and hold an arrow button. The selected arrow button changes to a Stop button. The machine
moves in the selected direction until you stop pressing the arrow key.
• Alternately, select Continuous. Then press (and release) an arrow key. The selected arrow button
changes to a Stop button. The machine moves in the selected direction until you press the Stop
button.
To stitch a straight line using the Move buttons
• Select the Stitch button. Press and hold an arrow button. The selected arrow button changes to a
Stop button. The machine stitches a line in the selected direction until you stop pressing the arrow
key.
Alternately, select both Stitch and Continuous. Then press (and release) an arrow key. The selected arrow
button changes to a Stop button. The machine stitches in the selected direction until you press the Stop
button.
Machine Quilting Tip: Straight-line quilting
Use the Move and Stitch options to stitch straight lines for stitch-in-the-ditch, piano-key
borders, and cross-hatching. Use the down arrow with stitch to baste down the right and
left sides of the quilt. If you also select Continuous, you will be able to use both hands on
the quilt to ensure that the quilt top and edges lay flat against the batting.
Press and hold one of
the arrow keys to move
the machine in that
direction.
Control the speed by
pressing either the
Plus Sign or the Minus
Sign, or entering a
value (up to 50) in the
number box.
Select Stitch to stitch
as the machine moves.
Select Continuous and select an arrow key
to move the machine. Press Stop to end
movement or stitching.