Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide - Manual (Page 31)

Pro-Stitcher User Manual Overview | 4.5
• Press Help and then press the button or menu option for which you need help to display the Help
pop-up box. Exit Help mode by pressing the Help button again or pressing the Close button (red X).
To cycle the needle up or down to form a half stitch
The Half Stitch button cycles the needle either to the up or the down position based on the current
position of the needle.
• Tap Half Stitch once to cycle the needle a half stitch.
To cycle the needle to the up position
The Full Stitch button cycles the needle a full stitch to the up position. If the needle is in the down position,
it will move only a half cycle so it stops in the up position. Subsequent presses of the button, however, will
cycle a full stitch, always ending with the needle in the up position.
• Tap Full Stitch once to cycle the needle a full stitch.
To display the on-screen grid
• Press Grid to turn the grid on or off.
Depending on the zoom level, the lines may indicate either one-inch or one-quarter inch gradations.
To quickly position the design and crosshairs on the screen
The Refresh button centers the design and crosshairs so both are visible on the screen. Refresh does not
reposition the design relative to the quilt.
Zoomed in Zoomed out
Darker lines show one-inch divisions
and faded lines show one-quarter inch
divisions.
Lines show one-inch divisions, but no
quarter-inch divisions.