Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide - Manual (Page 25)

Pro-Stitcher User Manual Installation | 3.17
Getting started with Pro-Stitcher
To move the quilting machine after the software has been loaded
• To move the quilting machine after the software has loaded, the motors should be disengaged.
Press the Disable Motors button in the upper-right corner of the screen to disengage the motors.
Note that the button changes to say Enable Motors.
If you have the EZ Carriage
Use the options on the Freehand screen to alternate between computerized quilting and free-motion
quilting.
• Choose Design, then Freehand. Select the Free Motion button. Pro-Stitcher automatically raises the
quick-release levers to disengage the carriage gears from the Flexirack. Select the Engaged
button to once again use Pro-Stitcher for computerized quilting.
If you have a carriage with levers
IMPORTANT: If you have a carriage with levers, you will need to manually raise the levers for free-
motion quilting and lower the levers for computerized quilting with Pro-Stitcher.
To use the USB flash drive
• A USB flash drive is included with the Pro-Stitcher and is pre-loaded with more than 180 designs.
These designs have also been loaded to the drive on the tablet computer, so the USB flash drive is
the backup copy of the designs.
Ü
Move the levers to the
down position to use
Pro-Stitcher.
When the carriage
levers are up (pictured),
the carriage gears are
disengaged from the
Flexiracks. Do this for
free-motion quilting.