Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 60

Pro-Stitcher User Manual
Design Menu | 5.25
• To stretch or shrink the design along the original X axis rather than how it is oriented on the screen,
select the Original Width button (with the blue angled line) and then press the Plus Sign (+) to
increase or Minus Sign (–) to decrease the size of the design.
NOTE: The Original Width and Original Height buttons are available only if a design has been
rotated.
• To stretch or shrink a rotated design along its original Y axis rather than how it is oriented on the
screen, select the Original Height button (with the yellow angled line) and then press the Plus Sign
(+) to increase or Minus Sign (–) to decrease the size of the design.
Blue line shows the
original x-axis, or
original width of a
rotated design.
Select to adjust
original width.
This original width of
this rotated design
was increased.
This original height
of this rotated design
was increased.
Yellow line shows
the original y-axis, or
original height of a
rotated design.
Select to adjust
original height.
!