Control the number of stitches per inch – Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 86

8.2 | Settings Menu
Pro-Stitcher User Manual
To set the Auto Jump threshold
• Press the Plus Sign (+) to increase or Minus Sign (–) to decrease the Auto Jump threshold by .5 inch.
Alternately, touch the number box and type a value directly and press Enter.
NOTE: If the jump distance is less than the Auto Jump threshold (number of inches entered in the
Auto Jump box), Pro-Stitcher does not pause for you to trim the thread before jumping to the next
start point. If the jump is longer than the Auto Jump threshold, Pro-Stitcher pauses before the jump
so you can trim the thread.
NOTE: If Tie Off options are turned on, Pro-Stitcher performs a tie off at the jump start and end
points, regardless of which jump method is performed. If the Pullup feature is turned on,
Pro-Stitcher performs a pull up at the end of the jumps that exceed the Auto Jump threshold.
Control the number of stitches per inch
• Select Settings, Stitches Per Inch.
To set the stitches per inch
• Press the Plus Sign (+) to increase or Minus Sign (–) to decrease the stitches per inch. Alternately,
touch the number box and type a value directly and press Enter.
!
!