Record the movements of your freehand quilting – Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 65

5.30 | Design Menu
Pro-Stitcher User Manual
To switch to free-motion quilting
• Manually raise the levers to switch from using computer-guided quilting to free-motion quilting. To
return to using Pro-Stitcher, manually lower the levers.
IMPORTANT: If you have a newer version of the firmware running on your quilting machine, you
will have two additional buttons. Select the Machine button and free-motion quilt as desired. When
you are ready to once again quilt with Pro-Stitcher, select Motors.
Record the movements of your freehand quilting
To record freehand motion
• Select Record. Begin quilting the design you want to record. When complete, select Stop. Save the
design to the computer (select File, then Save).
Machine Quilting Tip: Add recorded stitching to an existing design
Load a design and position the crosshairs where you want to begin recording freehand
motion. A stitching line connects the end point of the design and the position of the
crosshairs when recording begins.
When adding to an existing design, Pro-Stitcher baselines the design and treats it as a single design when
performing other design functions.
To mark and record straight lines
Mark is similar to Record, but instead of recording continuously as you move the machine, it records a
straight line between each marked point.
1. Move the quilting machine to the point where you want to begin a straight line and select Mark.
2. Move the machine to where you want to end the straight line and again select Mark. Continue
marking along the line, stitch the line, or save it as a design for future use.
Clears any designs
from the work area,
as well as any
recorded design.
To use a recorded
design in the future,
save it before
selecting Clear.
Ü