beautypg.com

Adjust settings while quilting is paused, Reposition designs while quilting is paused – Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual

Page 81

background image

7.8 | Quilt Menu

Pro-Stitcher User Manual

• Specify how far or how long Pro-Stitcher will stitch before pausing for you to trim the threads.

Choose either Seconds or Inches. Then touch the number box, enter a number into the number pad

that appears, and then press Enter.

Adjust settings while quilting is paused

On occasion you may need to pause stitching to make further adjustments to settings, to replace a bobbin,

or rethread the machine. You can change any of the settings described in the previous section while the

machine is paused. However, after pausing the machine, other options are also available: stitch, reposition,

status, and new start/end.

To pause quilting

• Press the Pause button for the machine to come to a gentle stop. Pro-Stitcher places gold marker at

the point in the design where you paused. To make changes to settings, select Quilt and then select

Reposition, Status, or New Start/End.

Reposition designs while quilting is paused

At any point after pausing the quilting, you can reposition the design based on the start point or end point.

• After pausing the quilting, select Quilt, then select Reposition.

To reposition the design while quilting is paused

The Current Point function is available only during a Pause. The Current Point is the point in the design

where the Pro-Stitcher paused the stitching. It is marked with a gold marker.

Turns off the pause

delay setting.

Choose Seconds or

Inches and then enter

a value in the number

box to specify how

much Pro-Stitcher will

stitch before pausing

for you to trim the

threads.