Point 2 point – Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 54

Pro-Stitcher User Manual
Design Menu | 5.19
To stretch a design to fill an area
You can stretch a design to fit either the width or the height of an area.
• First define an area and then choose either the Stretch Width or the Stretch Height button.
To calculate the optimal number of repeats for an area
• Press Fit to have Pro-Stitcher calculate the optimal number of repeats in both height and width. You
can add more horizontal or vertical repeats as desired and then select Stretch Width and Stretch
Height to fit them to the area.
Point 2 Point
Some designs are intended to be linked together horizontally or vertically but must be overlapped for
the start and end points to match up. The Point 2 Point buttons link the start and end points of repeated
designs. The following image shows the design before selecting Point 2 Point. (better screen shot)
To join horizontally repeated designs
• To link designs horizontally, ensure the start and end points are at the same height, or vertical coor-
dinate. Then select Horizontal Point 2 Point to align the designs such that the end point of the first
design matches up with the start point of the next design.
Stretches the
design to fit the
width of the area.
Calculates the
optimal number of
repeats both
vertically and
horizontally.
Stretches the design
to fit the height of the
area.
Aligns horizontally
repeated designs
such that the end
point of the first
design matches
up with the start
point of the next
design.
Aligns vertically
repeated designs
such that the end
point of the first
design matches up
with the start point
of the next design.