Work area, Selected vs. non-selected buttons – Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual
Page 29

Pro-Stitcher User Manual
Overview | 4.3
Work Area
The work area is the portion of the screen where you will load designs and work with them, in preparation
for quilting.
The crosshairs represent the position of the quilting machine’s needle relative to the current design and
will move as the quilting machine is moved when the carriage is engaged. For more information about how
to engage the carriage, see Freehand Menu in chapter 5, Design Menu.
The size of the bounding box is the width and height of the widest and highest points of the current design.
A large green circle on the loaded design indicates the start point, a large red circle indicates the stop point,
and the small green and red circles indicate the start and end points of jumps within the design. Purple
dashed lines connect the small green and red circles to show the jumps, or no-stitch, lines.
Selected vs. non-selected buttons
Some buttons (such as Grid and Ruler) are on/off, or toggle, buttons. Turn them on or off by touching them.
Other buttons are either/or buttons and are turned off by selecting another button with the opposite
action (such as Pan and Drag).
Size of current design
Crosshairs show the
position of the
machine’s needle.
The work area shows
the current design.
Design bounding box
(blue)
Area (purple) dis-
plays if an Area has
been defined.
Jump (dotted line)
Stitching start point
Stitching end point
Jump start and end points