Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide - Manual (Page 48)

Pro-Stitcher User Manual Design Menu | 5.13
To fine tune the angle of rotation
• Redefine either the start point or the end point as necessary by moving the quilting machine to a
new location and pressing either 2 Point Start or 2 Point End, depending on which end of the line
needs to be repositioned.
NOTE: A start point on the left followed by an end point on the right (i.e. a straight line with start
on the left and end on the right) is a 0° rotation, or no rotation. A start point on the right and an
end point on the left (i.e. a straight same line, but with the start and end points reversed) is a 180°
rotation, or in other words, the design will be upside down.
!