beautypg.com

Baby Lock ProStitcher Version 14.04.0051 (BLPS3) Instruction and Reference Guide User Manual

Page 40

background image

Pro-Stitcher User Manual

Design Menu | 5.5

Loading the thumbnails may take a few moments, depending on how many designs are stored in

the selected folder and how intricate those designs are. While the thumbnails load, a colored block

with the name of the file type will be visible in place of the actual design thumbnail.

3. Double-tap the name of the desired file or single tap and then press Open to load the design. A

prompt to Clear Area appears on-screen. Choose Yes to clear any area you have defined or No to

leave the area as designated.

To save a design

Pro-Stitcher prompts you to save your work when closing the software or closing a design. However, it is a

good idea to save your work regularly.

• Press Save to save the design in its current state. The design library appears with the name of the

current design loaded.

• To overwrite the existing design with that name, press Save.

• To save a copy of the design to a new name, enter a new name using the pop-up keyboard and

then press Save.

• To cancel without saving the design, press Cancel.

To save a group as a design or a project

You can save a group of designs as a design or as a project. If you save a group as a design, Pro-Stitcher

creates a single design. When you load it again in the future, you will not be able to work with the designs

independently.

• To save a group as a design, select the group, select Save and then select Design before giving it a

filename and saving.

If you save a group of designs as a project, Pro-Stitcher saves each design independently so that when you

load the project again, you will be able to modify the designs individually.

• To save a group as a Project, select the group, select Save and then select Projects. Give the group a

file name and select Save on the Save Project screen.

Designs are organized into

four folders: block designs,

continuous line designs, corner

designs, and triangle designs.

Select a design and

then choose Delete

File to remove it from

your computer.
Choose Refresh to

reload the thumbnails

in the selected folder.

Select a design and

press Open to load it

or press Cancel to exit.

Use these buttons to navigate among

folders on the current drive or to open

folders on a USB drive.